How To Open A Fossil Watch? – Tips For New Users

If your fossil watch stops from working, then it is time for you to change the battery inside. Probably you want to do it on your own, but you’re hesitant to try because you don’t want to break your favorite watch. But don’t worry! Because in this article, you will learn how to open fossil watch.

Steps in Opening a Fossil Watch

We know how much you wanted to learn how to open a fossil watch, so you can apply it to yours. Don’t worry because the process isn’t that hard. You don’t need to send it to a watch shop because you can do it by just following the steps below.

Use Stress Ball

Here’s how to change battery fossil watch using a stress ball.

What you need:

• Fossil watch
• Rubber ball or stress ball
• Soft towel
• Small screwdriver
• New battery

What to do:

• Buy a new battery.
• Make sure your hands are free from moisture before doing this. If you have a sweaty palm, dry it with a towel.
• Lay your soft towel flat above the table.
• Turn over your watch.
• Get your rubber ball.
• Put the rubber ball behind the back cover of your watch.
• Twist the rubber ball against the back cover by applying pressure.
• Once you get the grip, continue twisting until the cover loosens.
• Keep unscrewing the back cover using your fingers.
• Gently pull out the plastic piece inside and there you go! It’s open.
• Using a small screwdriver, gently push out the dead battery.
• Replace the old battery with a new one.
• Put back the plastic piece.
• Put back the back case with the use of the stress ball.
• Set the time.
• See how it works.

Wear Rubber Gloves

How to open fossil watch using rubber gloves? Try these procedures below.

What you need:

• Fossil watch
• Rubber Gloves
• Soft towel
• Small screwdriver
• New battery

What to do:

• Buy a new battery.
• Dry your hands.
• Put on the rubber gloves.
• Lay your soft towel flat above the surface.
• Turn over your watch.
• Put your hands at the back cover.
• Use pressure and twist the back cover in a counterclockwise position.
• Once you get the grip continue twisting until the cover loses.
• Keep unscrewing the back cover using your fingers,
• Gently pull out the plastic piece inside and there you go! It’s open.
• Using a small screwdriver, gently push out the dead battery.
• Replace the old battery with a new one.
• Put back the plastic piece.
• Put back the back case with the use of the stress ball.
• Set the time.
• See how it works.

Conclusion

There is nothing more annoying than to look at the dead watch on your wrist. You sure want to do something about it but scared to make a move because of the damage. But now that you learned how to open fossil watch, you can do it on your own! You don’t need to go to a watch depot to have your battery replaced because you can make it work! Just follow the procedures accurately and you’re set.